Vertical HIFU machines

C2034 vertical 7D HIFU, 2 handles can work at once, 1.5–13 mm

A floor-standing 7D unit listed as C2034. The two handles can work at the same time. Seven cartridge depths from 1.5 to 13 mm. Electrical figures and packing below are from the source listing. Shot life is not stated there.

  • C2034
  • 2 handles can work at once
  • 1.5–13 mm
  • 100–240 V

C2034 vertical 7D HIFU, 2 handles can work at once

Specification

Specification

ModelC2034
FormVertical
Cartridges7: 1.5, 2.0, 3.0, 4.5, 6.0, 9.0 and 13.0 mm
Handles2 (they can work at the same time)
SupplyAC 100–240 V
Frequency4–7 MHz
Power200–400 VA
Fuse5 A
Packing size116 × 57 × 61 cm
WeightAbout 42 kg
Shot lifeNot listed on the source page

Figures are from the C2034 product page on ipl-elight-shr.com. A source-listing photo showed a third-party wordmark and is not used here. This category site does not list prices.

How this differs from the other vertical unit

This is not the vertical 7-cartridge unit already on this site (catalogue Q2569). That page lists a 10.4-inch display, 20,000 lines on face cartridges and 30,000 on body cartridges, output 0.1–0.3 J/cm², and packing 57 × 60 × 120 cm at 46 kg. This C2034 listing instead gives AC 100–240 V, 4–7 MHz, 200–400 VA, a 5 A fuse, packing 116 × 57 × 61 cm and about 42 kg. Keep the two specification sets apart.

Unlike Q2051, the source page for C2034 says the handles can work at the same time.

Questions

Can the two handles work at the same time?

Yes. The source listing states that they can.

Which cartridge depths are listed?

1.5, 2.0, 3.0, 4.5, 6.0, 9.0 and 13.0 mm.

What electrical figures are listed?

AC 100–240 V, 4–7 MHz, 200–400 VA, and a 5 A fuse.

Is this the same machine as the other vertical page?

No. The other vertical page (catalogue Q2569) lists a 10.4-inch display, line counts and a different packing size and weight. Those figures are not copied onto this page.

How many shots or lines does each cartridge have?

The source page does not state a shot or line life. Inquire if you need that figure.

Send an inquiry

WhatsApp or email is enough. Name the model you are looking at.